Pompe periferiche

Tipologie di prodotti

Family pump MTP700
Prodotto | Family pump MTP700

2 Stage Peripheral pump suitable for use with water and low corrosion/abrasion fluids. Ideal for Carbonator, Reverse osmosis and espresso coffee machine


Technical data

Body material PEI – Ultem PW2300-1000 / PPS Fortron MT9141L4
Seal material NBR / CERAMIC / GRAPHITE
Shaft material Stainless steel
Electrical connect cable
Insulation class F/B:
Power Supply 230V / 1 / 50Hz
120V / 1 / 60Hz
Max. Absorbed Current 1,65 A
3,2 A
Approvals CE – NSF61 (PENDING)
CE – NSF61 (PENDING)
Ambient temperature 50 °C
Fluid temperature 60 °C
Suction Non Self Priming

Hydraulic connection Inlet / Outlet

Standard G.3/8 Male / G.3/8 Male ( With or without By-pass Valve )
Fast Joint From Ø8 to Ø3/8

 

Pump model MTP700

Hz ΔP [barg] Flow Rate [L/h]
50 0 8,5
50 7 3,2
50 10 0
60 0 9,5
60 7 5,5
60 12,5 0

 

Note:  The inlet pressure shall be add on the above performance curve with the relative effect on the flow rate. Hydraulic characteristics obtained with water at 20° C at pump nominal speed.
Working tolerance on Hydraulic and Electrical characteristics is ± 10%.

Family pump MTP600
Prodotto | Family pump MTP600

Technical data

Body material Brass
Seal material EPDM / CERAMIC / GRAPHITE
Shaft material Stainless steel
Electrical connect cable
Insulation class F/B
Power Supply 230V / 1 / 50Hz
120V / 1 / 60Hz
400V/ 1 / 50Hz
Max. Absorbed Current 1,15 A
2,3 A
0,65 A
Approvals CE
Ambient temperature 45 °C
Fluid temperature 80 °C
Suction Non Self Priming

Hydraulic connection Inlet / Outlet

Standard G.¼ Female / G.¼ Female
Barb From Ø6 to Ø118
Niples G.¼ Male / G.¼ Male

 

Pump model MTP600HP

Hz ΔP [barg] Flow Rate [L/h]
50 0 480
50 2 280
50 4 50
60 0 570
60 2 375
60 4 170

 

Note: Hydraulic characteristics obtained with waters at 20° C at pump nominal speed.
Working tolerance on Hydraulic and Electrical characteristics is ± 10%.