2 Stage Peripheral pump suitable for use with water and low corrosion/abrasion fluids. Ideal for Carbonator, Reverse osmosis and espresso coffee machine
Technical data
| Body material |
PEI – Ultem PW2300-1000 / PPS Fortron MT9141L4 |
| Seal material |
NBR / CERAMIC / GRAPHITE |
| Shaft material |
Stainless steel |
| Electrical connect |
cable |
| Insulation class |
F/B: |
| Power Supply |
230V / 1 / 50Hz
120V / 1 / 60Hz |
| Max. Absorbed Current |
1,65 A
3,2 A |
| Approvals |
CE – NSF61 (PENDING)
CE – NSF61 (PENDING) |
| Ambient temperature |
50 °C |
| Fluid temperature |
60 °C |
| Suction |
Non Self Priming |
Hydraulic connection Inlet / Outlet
| Standard |
G.3/8 Male / G.3/8 Male ( With or without By-pass Valve ) |
| Fast Joint |
From Ø8 to Ø3/8 |
Pump model MTP700
| Hz |
ΔP [barg] |
Flow Rate [L/h] |
| 50 |
0 |
8,5 |
| 50 |
7 |
3,2 |
| 50 |
10 |
0 |
| 60 |
0 |
9,5 |
| 60 |
7 |
5,5 |
| 60 |
12,5 |
0 |
Note: The inlet pressure shall be add on the above performance curve with the relative effect on the flow rate. Hydraulic characteristics obtained with water at 20° C at pump nominal speed.
Working tolerance on Hydraulic and Electrical characteristics is ± 10%.